STINGER’S HOT ROD SHOP’S Stretched 1927 Ford Roadster

Posted in Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package on April 19, 2011 by stingershotrodshop

STINGER’S HOT ROD SHOP’S Stretched 1927 Ford Roadster

Posted in Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on April 12, 2011 by stingershotrodshop

Stinger’s Hot Rod Shop’s Stretched 1927 Track T Roadster Fiberglass Body and Chassis package previously owned by George Poteet.  Photos taken by Rod and Custom Magazine.

 

 

 

 

 

 

 

 

Stinger’s Hot Rod Shop’s Stretched 1927 Track T Indy Roadster Fiberglass Body and Chassis Package. Owner Gary Eisenhower.

INDY STYLE TRACK T NOSE

Posted in 1927 Illustration, Indy Style Track T Nose, Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on April 12, 2011 by stingershotrodshop

Stinger’s Hot Rod Shop now offers an Indy Style Track T nose.  The Indy nose can be purchased in either fiberglass or made custom in aluminum.  The grilles are laser cut.  The grilles are made with vertical or horizontal bars and come in mild steel or chrome plating.  We can fabricate custom fairings and headrests.  We can also custom fabricate nerf bars.  We sell and can produce/fabricate everything you need to build your own personal “Indy Style” roadster.

Illustration by Brian Stinger~ Rod and Custom Magazine July 2004 Dream Car of the Month



Stinger’s Track T Stretched Ford Roadster featured on cover of Goodguys Magazine.



Indy Style Track T Nose

FRAMES AND CHASSIS

Posted in 1927 Frame and Chassis Info, Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on April 12, 2011 by stingershotrodshop

Stinger’s Hot Rod Shop offers the ultimate Track T chassis.  Our frame is custom designed to fit our stretched fiberglass body and pan packages.  It is completely tig welded for strength and appearance.  We offer a variety of motor and transmission choices.  All brackets are laser cut for accuracy and made to accept Magnum Axle Company’s suspension components.  This chassis with its 107 inch wheelbase provides a stable and comfortable ride for its occupants.

FRAMES AND CHASSIS

  • Perimeter Frame
  • Mild Steel Complete Rolling Chassis
  • Show Polished Complete Rolling Chassis

FRAME FEATURES

  • 2×3 Inch Square Tube
  • 6 Inch Rear Kick-Up (allows for ride height variations)
  • 1 Inch Square X Member with 1×3 Cross Member
  • Front Spring Mount Welded On
  • Body Mount Holes Drilled and Nutserted
  • 2 Exhaust Pipe Mounts
  • 2 Gussets
  • Grille Shell Mounting Tabs
  • Front Panhard Bar Mounts
  • Front Shock Mounts
  • Vega Box Mount
  • Motor Mounts ~ small block Chevy (standard) – flathead, small block Ford – 4 and 6 cylinders available (call)
  • Transmission Mounts ~ adjustable for Ford and Chevy ect.
  • Rear Panhard Bar Brackets
  • Coil-over Mounts
  • Front and Rear Hairpin Radius Rod Mounts

MODIFICATIONS AND FEATURES….

Posted in 1927 Body Modifications/Features, Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on April 12, 2011 by stingershotrodshop

FIBERGLASS BODY MODIFICATIONS

~ Cockpit Stretched 5 1/2 Inches
~ Doors Stretched 2 1/2 Inches
~ Cowl Tipped 3/4 Inches
~ Opening Doors and Trunk Lid

 

 

 

 

 

FIBERGLASS BODY FEATURES (Installed)

  • Narrowed ’32 Ford Dashboard
  • 2 1/2 Inch Dropped Floor
  • Transmission Tunnel
  • Battery Box Built into Trunk Floor
  • Built in ’39 Ford Taillight Mounts
  • Door Hinges and Bear Claw Latches
  • Trunk Hinges, Latch and Support Rods
  • 1 Inch Square Steel Inner Body Structure ~ attached to door hinge points and body mounts ~ steel safety bars built into doors and sides ~ under dash brake mount plate

FIBERGLASS BODY AND ACCESSORIES….

Posted in Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on April 12, 2011 by stingershotrodshop

STINGER STRETCHED ROADSTER BODY ~ inner steel structure with opening doors and deck lid

 

 

 

 

FIBERGLASS BODY ACCESSORIES

  • Five Piece Body and Pan Set (pans completely cover frame)
  • 1932 Ford Grille Shell ~ chopped 4 1/2 inches
  • 1932 Ford Grille Insert
  • Indy Style Track T Nose
  • Indy Style Track T Grille
  • 1927 Windshield Posts ~ complete with glass setting tape / hardware and template for mounting
  • Under Dash 90 Degree Reverse Brake Mount and Pedal Options (1) Manual Brake with Master Cylinder (2) Manual Bare Brake (3) Manual Brake and Clutch with Master Cylinders (4) Manual Brake and Clutch Bare

A ’27 ROADSTER THAT FITS EVERYONE….

Posted in Stinger's Stretched 1927 Ford Fiberglass Body and Chassis Package with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on April 12, 2011 by stingershotrodshop

Finally, a ’27 roadster that fits everyone! Stinger’s Hot Rod Shop has produced the ultimate Track T package. This package includes a stretched fiberglass body with opening doors and deck lid, grille shell, and body pans.  All of Stinger’s fiberglass bodies and parts are hand laminated to give them the highest level of strength and quality.  We think you will agree, this ’27 roadster body is the straightest on the market making the builders job much easier by minimizing the body work.

Picture ~ Goodguy’s Columbus, Ohio

Follow

Get every new post delivered to your Inbox.